7 Great Reasons to Use EnerFoam
- DESIGNED WITH THE TRADE IN MIND. SKINS IN 3 MINUTES
EnerFoam is easy to work with. Most other products on the market take hours to skin; thus time is saved in working with the product.
- FULLY CURED WITHIN 1 HOUR
Other products can take as long as 24 hours to cure. Again time is saved in working with EnerFoam.
- QUICK TO APPLY
Saves time and money by using a unique application system which offers a controlled bead for easy application.
- WHAT YOU SPRAY IS WHAT YOU GET
EnerFoam expands only 20% after being applied. Therefore you don’t have to guess how much to put in a gap. Just fill it.
- A UNIQUE VALVE DESIGN ENSURES THAT UNUSED PRODUCT CAN BE STORED FOR LONG PERIODS OF TIME WITHOUT SPOILING
Most other products are ‘use it or lose it’. They spoil within 12 to 48 hours if not finished. EnerFoam can be stored on the gun for up to 6 months.
- HIGH QUALITY ADHESIVE PROPERTIES. ENERFOAM HAS PASSED ASTM C557, BEING THE PLASTERBOARD STANDARD.
EnerFoam can be used as an adhesive. This also allows EnerFoam to hold onto surrounding substrates well (other products can sometimes run).
- VERY HIGH YIELDING
EnerFoam is made from very high quality materials. This ensures that the yield achieved is amongst the highest available on the market. Therefore you get more for your money.
EnerFoam is professional insulation foam, designed to be flexible and to have controlled expansion.
EnerFoam is a single component polyurethane foam, with low expansion high yield and a fast cure time. EnerFoam does not contain solvents; it will not stain or melt polystyrene or styrofoam. EnerFoam retains 20% flexibility so it moves with a building’s expansion and contraction. EnerFoam is moisture cured, it can be applied to wet and frozen timber and the operating temperature range is wider than most filler foams.
EnerFoam is available for use with all of the applicator guns, which allow the bead size to be controlled. When used as directed on these applicator guns EnerFoam can be used until the can is empty.
EnerFoam is prefect for filling around doors, windows, around pipes, and wiring, for pest control, general gap and hole filling requirements and for sound caulking.
EnerFoam has a 20% expansion for a perfect seal every time, will not warp surrounding substrates, can withstand normal building movement without shearing. Other foams are ‘use it or lose it, EnerFoam features a quick moisture cure, can be cut and trimmed back within an hour and is paintable, dose not contain solvents and will not harm polystyrene or styrofoam. It will adhere to drywall, vinyl faced wallboard, wood or steel studs, polystyrene or Styrofoam, concrete, masonry and other structurally sound surfaces.
Coverage: 908g can will replace up to 120 (300ml) cartridges of sealant when using the same method of application. This is equivalent to about 35 litres in volume.
Working time and cure information: 3-5 minutes working time, trim within 1 hour.
Shelf life: 18 months from date of manufacture.
Operating temperature: - 5˚C to 50˚C
Blowing Agent: Hydrocarbon
